B17-52D Dynamo Bearing/generator Bearing 15X52X24mm wholesalers

Bearing Retained:Yes (with retaining; Flange Shape:Square Type; Volume Discount:Available; Shape:Flanged Pilot Type; Seals:VV (Non-Contact Rubb; Width T(mm):55; Flange O.D. H(φ):56; Days to Ship:7 Days; Type:Bearings with Housin; RoHS:6;

Roller Profile:Symmetric; Constant e:0.36; Bore Type:Tapered Bore; Nr. of Holes:6; Center Guidance:Fixed Inner Ring Rib; Axial Load Factor Y1:1.87; Limiting Speed - Grease:1,200 rpm; d:180 mm; ra (max):3 mm; Fillet Radius/Chamfer:4 mm;

Da - Cup Frontface Backing Diameter:3.68 in; B - Cone Width:0.8640 in; Y2 - ISO Factor10:2.84; Bearing Weight:3.11 lb; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:42200 lbf; r - Cup Frontface To Clear Radius2:0.03 in; Cage Type:Stamped Steel; R - Cone Backface To Clear Radius1:0.09 in; Series:385; Cg - Geometry Factor12:0.0859;

d:7.8730 in; Aa - Cage-Cone Backface Clearance:0 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:74200 lbf; T - Bearing Width across Cups:5.2499 in; K - Factor7:1.12; D:12.5984 in; Bearing Weight:84.2 lb; Cone Part Number:93788D; Y2 - ISO Factor10:1.92; e - ISO Factor8:0.52;

Bearing Retained:Yes (with retaining; Flange Shape:Square Type; Volume Discount:Available; Shape:Flanged Pilot Type; Seals:VV (Non-Contact Rubb; Width T(mm):55; Flange O.D. H(φ):56; Days to Ship:7 Days; Type:Bearings with Housin; RoHS:6;

Da - Cup Frontface Backing Diameter:3.68 in; B - Cone Width:0.8640 in; Y2 - ISO Factor10:2.84; Bearing Weight:3.11 lb; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:42200 lbf; r - Cup Frontface To Clear Radius2:0.03 in; Cage Type:Stamped Steel; R - Cone Backface To Clear Radius1:0.09 in; Series:385; Cg - Geometry Factor12:0.0859;

Rolling Element Material:Bearing Steel; Bearing Inner Dia. Shape:Tapered hole adapter; B:85; Unit, Type:Insert Bearing Unit; Seal:Silicone; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; Stroke:No; Days to Ship:8 Days; Basic Load Rating, Static Rating(N):52200;

Da - Cup Frontface Backing Diameter:3.68 in; B - Cone Width:0.8640 in; Y2 - ISO Factor10:2.84; Bearing Weight:3.11 lb; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:42200 lbf; r - Cup Frontface To Clear Radius2:0.03 in; Cage Type:Stamped Steel; R - Cone Backface To Clear Radius1:0.09 in; Series:385; Cg - Geometry Factor12:0.0859;

Bearing Retained:Yes (with retaining; Flange Shape:Square Type; Volume Discount:Available; Shape:Flanged Pilot Type; Seals:VV (Non-Contact Rubb; Width T(mm):55; Flange O.D. H(φ):56; Days to Ship:7 Days; Type:Bearings with Housin; RoHS:6;

Days to Ship:8 Days; RoHS:6; Housing Material:304 Stainless Steel; Shape:Front Mount; Bearing Used:Deep Groove Ball Bea; Shape:Front Mount; Bearing Part Number:6202; Width T(mm):16; Type:Bearings with Housin; Number of Bearings:Single;

Accessory:No Cover; Unit Body Material:Cast Iron; Seal:Silicone; Basic Load Rating, Dynamic Rating(N):133000; Rolling Element Material:Bearing Steel; Grease Type:SH44M; Rolling Element Material:Bearing Steel; Surface Treatment:No; d:85; Pillow Type, Category:Standard;

Bearing Number:LSM90BX; Cr - Dynamic Load Rating:42039 lbf; Housing Width:5.3 in; Series Type:Light Series; Dimension J:12.6 in; Dimension M:3.5 in; Weight:64 lb; Dimension L:15.0 in; Support Type:Two-Bolt Plummer Blo; Dimension H:4.409 in;

Roller Profile:Symmetric; Constant e:0.36; Bore Type:Tapered Bore; Nr. of Holes:6; Center Guidance:Fixed Inner Ring Rib; Axial Load Factor Y1:1.87; Limiting Speed - Grease:1,200 rpm; d:180 mm; ra (max):3 mm; Fillet Radius/Chamfer:4 mm;

Rolling Element Material:Steel; Types:16**/6*** series; Max. Allowed rpm(rpm):4700; Seal, Shield Symbols:ZZ; Retainer Type:Punching; Preload Mark:CM; Size Standards:Metric System; Outer Ring Shape:Flat; Inner/Outer Ring Material:Steel; D:140;

Clearance sign:No; Specifications:Standard; Outer Ring:With Outer Ring; Internal Symbol:No; Retainer Type:Momi removing; Outer Ring Type:Flat; Acoustic Symbol:No; Inner/Outer Ring Material:Steel; I.D.(Ø):75; Low Torque Specification:No;