ECS-622

Flange O.D. H(φ):60; Number of Bearings:Double; Bearing Retained:Yes (with retaining; Bearing I.D. d(mm):20; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; RoHS:6; Housing Material:304 Stainless Steel; Flange Shape:Compact Type;

Internal Symbol:No; Symbol of contact angle:No; RoHS:6; Outer Ring Type:Flat; Precision Grade Symbol:No; Low Torque Specification:No; Material Symbol:No; Load Direction:Radial; Width(mm):68; Load Direction:Radial;

Cone Part Number:HM237542H; Da - Cup Frontface Backing Diameter:272.00 mm; B:63.503 mm; db - Cone Backface Backing Diameter:202.95 mm; Ab - Cage-Cone Frontface Clearance:5.1 mm; K - Factor7:1.83; Series:HM237500; G1 - Heat Generation Factor (Roller-Raceway):751.2; e - ISO Factor8:0.32; Cg - Geometry Factor:0.117;

d:1.5748 in; Cage Type:Stamped Steel; K - Factor8:1.97; G2 - Heat Generation Factor (Rib-Roller End):16.1; C90 - Dynamic Radial Rating (90 million revolutions)5:10000 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:38700 lbf; B - Cone Width:1.4550 in; C0 - Static Radial Rating:46200 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:17500 lbf; Cone Part Number:543;

ra (max):3 mm; d:140 mm; Inside Ring Outside Diameter:180 mm; Dynamic Load Rating:665,000 N; Configuration:Single Row; Limiting Speed - Oil:2,200 rpm; Static Load Rating:795,000 N; r1:4 mm; Bore Type:Cylindrical Bore; ra1 (max):3 mm;

Bearing Inner Dia. Shape:Cylindrical Bore Set; Rolling Element Material:Bearing Steel; Fit:J7; d:20; Basic Load Rating, Dynamic Rating(N):12800; Basic Load Rating, Static Rating(N):6650; Accessory:With steel plate cov; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Grease Type:SH44M;

Width T(mm):13; Holder Surface Treatment:Black Oxide Coating; Type:Bearings with Housin; Height H(mm):25 ～ 50; Bearing Part Number:6804; RoHS:6; Housing Material:1045 Carbon Steel; C Chamfered:Not Provided; Bearing Material:[Steel] Steel; Lateral Width L(mm):68;

d:1.5748 in; Cage Type:Stamped Steel; K - Factor8:1.97; G2 - Heat Generation Factor (Rib-Roller End):16.1; C90 - Dynamic Radial Rating (90 million revolutions)5:10000 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:38700 lbf; B - Cone Width:1.4550 in; C0 - Static Radial Rating:46200 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:17500 lbf; Cone Part Number:543;

Cone Part Number:HM237542H; Da - Cup Frontface Backing Diameter:272.00 mm; B:63.503 mm; db - Cone Backface Backing Diameter:202.95 mm; Ab - Cage-Cone Frontface Clearance:5.1 mm; K - Factor7:1.83; Series:HM237500; G1 - Heat Generation Factor (Roller-Raceway):751.2; e - ISO Factor8:0.32; Cg - Geometry Factor:0.117;

Bearing Inner Dia. Shape:Cylindrical Bore Set; Rolling Element Material:Bearing Steel; Fit:J7; d:20; Basic Load Rating, Dynamic Rating(N):12800; Basic Load Rating, Static Rating(N):6650; Accessory:With steel plate cov; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Grease Type:SH44M;

Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Seals:DD (Contact Rubber S; Housing Material:1045 Carbon Steel; Flange Shape:Round Type; Width T(mm):25 ～ 50; Holder Surface Treatment:Electroless Nickel P; Bearing Part Number:626; Days to Ship:7 Days; Type:Bearings with Housin;

Flange O.D. H(φ):60; Number of Bearings:Double; Bearing Retained:Yes (with retaining; Bearing I.D. d(mm):20; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; RoHS:6; Housing Material:304 Stainless Steel; Flange Shape:Compact Type;

ra (max):3 mm; d:140 mm; Inside Ring Outside Diameter:180 mm; Dynamic Load Rating:665,000 N; Configuration:Single Row; Limiting Speed - Oil:2,200 rpm; Static Load Rating:795,000 N; r1:4 mm; Bore Type:Cylindrical Bore; ra1 (max):3 mm;

ra (max):3 mm; d:140 mm; Inside Ring Outside Diameter:180 mm; Dynamic Load Rating:665,000 N; Configuration:Single Row; Limiting Speed - Oil:2,200 rpm; Static Load Rating:795,000 N; r1:4 mm; Bore Type:Cylindrical Bore; ra1 (max):3 mm;

Width T(mm):13; Holder Surface Treatment:Black Oxide Coating; Type:Bearings with Housin; Height H(mm):25 ～ 50; Bearing Part Number:6804; RoHS:6; Housing Material:1045 Carbon Steel; C Chamfered:Not Provided; Bearing Material:[Steel] Steel; Lateral Width L(mm):68;